Charging Manual

Charging via Customer Card

1. START CHARGING PROCESS

  • Hold your card up to the card reader and wait for another connection check.
  • As this charging station has different connections, select the outlet that you require on the display (CCS, CHAdeMO).
  • Insert the plug into the charging socket on the vehicle until it clicks. 
  • Touch the display to start the charging process.
  • The charging process will start and the battery charge level, remaining charging time, supplied kWh and expired charging time will be shown on the display.
  • After some time the display will be locked automatically. You can unlock it by holding your RFID card to the card reader.

2. END THE CHARGING PROCESS

  • Hold your customer card to the card reader to finish the loading process.
  • Press the STOP button on the display.
  • Disconnect the charging cable from the vehicle. CHAdeMO: press the button on the chargoing cable  for disconnecting the vehicle.

1. START THE CHARGING PROCESS

  • First connect the charging cable to the vehicle only.
  • Select the charging point on the map.
  • Press the START button to start charging.
  • After successful authorization, the charging process starts automatically.

2. END THE CHARGING PROCESS

  • Press the STOP button.
  • Disconnect the charging cable from the vehicle. 

Important Message

  • The security check between the vehicle and charging station can take up to 30 seconds.
  • If the charging process is started via your mobile phone, it must also be terminated via your mobile phone. A combination of different activation methods (customer card, mobile phone) is not possible.